A. The final plat shall be clearly and legibly drawn in permanent black ink upon mylar or paper.

B. The scale of the plat shall be not less than one inch equals two hundred feet. Lettering shall be at least 0.08 inches high. The perimeter of the plat or subdivision being recorded shall be depicted with heavier lines wider than the remaining portion of the plat or subdivision.

C. The size of each sheet shall be eighteen by twenty-four inches.

D. A marginal line shall be drawn completely around each sheet, leaving an entirely blank margin of two inches on the left side, and one-half inch on each of the other three sides.

E. If more than two sheets are used, an index of the entire subdivision showing the arrangement of all sheets shall be included. Each shall be appropriately numbered.

F. The plat title, date, scale and north arrow shall be shown on each appropriate sheet of the final plat.

G. All signatures placed on the final plat shall be original signatures written in permanent black ink. (Ord. 1480 §5, 2015; Ord. 1235 §1, 8, 2005).